Test pin, steel, tolerance class 1, dia. 5 x 70 mm - T1 individual test pin, 5.00-5.99 mm in increments of 0.01 mm

The images are examples.

Test pin, steel, tolerance class 1, dia. 5 x 70 mm

Name: Test pin, steel, tolerance class 1, dia. 5 x 70 mm
Brand: ORION
SKU: 32481500

Brand: ORION

Material: Gauge steel

Length: 70 mm

DIN: 2269

Calibration Group: AE

Art.-no. 32481500

Manufacturer article no. 32481500

EAN 4039247191079

All versions

Similar products

Individual prices for customers after login

Test pin, steel, tolerance class 1, dia. 5 x 70 mm

Art.-no. 32481500

Quantity

Price per

Piece

You need more information or have not found your desired product?

Login/Register
Call customer service: +33 (0)1 69 19 43 90

Application

For measuring bore hole clearances, bore diameters, angularity of bores etc.

Execution

Ground and lapped
Hardened 60-64 HRC
Diameter of 0.300 to 0.999 mm with a length of 40 mm; diameter from 1.000 mm with a length of 70 mm
from diameter 3.00 mm: One end with 30-45° chamfer; other end deburred with diameter marking on end face
from dia. 1.5 to 2.999 mm: with 30-45° chamfer on both sides; diameter marking on the outer surface
from dia. 1.00 to 1.499 mm: with 30-45° chamfer on both sides; without diameter marking
up to 0.999 mm: both ends deburred, without diameter marking

Notes

Engraving is only possible from approx. 6 mm diameter and only with a few characters.

Product information

HAHN+KOLB Catalogue

Certificates/ Documents

Brand	ORION
EAN	4039247191079
Manufacturer Part Number	32481500
Material	Gauge steel
Tolerance class	1
Min./max. diameter	3.000-5.999 mm
Diameter	5.00 mm
Length	70 mm
DIN	2269
Calibration Group	AE
Harmonized System Code	90318020
Gross Weight	0.008 kg

Additional accessory:

Product

Description

Quantity

Price per

Price

labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

MELUTEC

Art.-no. 30000887

x 1 Piece

DAkkS calibration, individual test pin, 1.001-10 mm, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30003231

x 1 Piece

Factory calibration, individual test pin, 1.001-10 mm, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30004242

x 1 Piece

DAkkS calibration without sticker, individual test pin, 1.001-10 mm, option 1

AE calibration group for test pins

MELUTEC

Art.-no. 30005231

x 1 Piece

The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)

In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050

Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units

The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.

In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.