EROGLU shrink-fit chuck SK40-16-160
Brand: EROGLU
Art.-no. 23151924
Manufacturer article no. 403.25.16.160
Individual prices for customers after login
Application
Accommodates tools with straight shank
Execution
- For 3, 4 and 5 mm dia., use only carbide shanks
- Mounts suitable for inductive, contact and hot air heat-shrink units
- Alloyed case-hardening steel with core tensile strength of at least 950 N/mm²
- Case-hardened HRC 58 ± 2, hardness depth 0.6 mm ± +0.2 mm
- Taper angle tolerance quality AT3 according to DIN 2080
- Taper Ra 0.2 surface quality
- Hole for data carrier DIN 69873 in the flange
- Black oxide surface
Notes
Previous standard DIN69871-1
Delivery
1x SK40 shrink-fit chuck, without adjusting screw
Last viewed
ZARGES large pocket 420 x 260 x 40 mm, for box dimensions from 550 x 350 mm
QNESS Q60 A+ EVO long micro hardness tester, test load range 0.25 gf-62.5 kgf
ORION high-perf. drill bit SC TiNAlOX HPC 5xD 6.0 x 3 x 66 mm HB shank with IC
ANKE workbench model 428 V 2000x700x900 mm panel zinc sheet coat., RAL 7035/5010
MITUTOYO tube-shaped internal micrometer, 50–1500mm with carbide measuring faces
ORION high-perf. drill, SC TiAlN, HPC 8xD 5.9 mm x 6 mm x 95 mm HB internal
ATORN solid carbide drill UNI TiAlNplus 3xD with IC 10.6 mm straight shank HA
ORION HPC multi-tooth mill, torus, short cutter, D 3.0x3x4x50mm, HA shaft, r=0.5
DAkkS calibration for depth vernier callipers 0-600 mm
HAKRO men's knitted fleece jacket, mottled royal blue, size XS