For detailed information, other images and documents, please select individual articles from the following table.
AMF Installation clamping module with central lock
for automation solutions
Products
Application
Zero-point clamping system for automation solutions, for clamping with optimised setup time for machining and chipless machining.
Execution
- Hydraulic opening.
- Pneumatic blow-out.
- Operating pressure for opening: min. 60 bar to max. 70 bar.
- Hardened cover and piston.
- Repeat accuracy less than 0.005 mm.
- With opening control (pneumatic) and support control (pneumatic).
- Centric blow-out, support control and opening control.
Notes
The pull studs are fastened and installed using ISO 10642 M12 12.9 countersunk head screws. Opening control: Dynamic pressure when clamping module is open, flow when clamping module is locked. Support control via blow-out function: Dynamic pressure when fixture plate is present. The installation clamping module is opened hydraulically and locked mechanically by spring force. The pressure line can then be disconnected as desired (module is clamped pressure-free). The clamping module has four connections: 1 = hydraulic opening, 3 = pneumatic blow-out and support control, 4 = pneumatic opening control input, 5 = pneumatic opening control output * Please follow the installation instructions.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!