For detailed information, other images and documents, please select individual articles from the following table.
AMF Installation clamping module with central lock
for automation solutions
Products
Application
Zero-point clamping system for automation solutions, for clamping with optimised setup time for machining and chipless machining.
Execution
- Pneumatic opening.
- Pneumatic blow-out.
- Operating pressure for opening: min. 5 bar to max. 12 bar.
- Hardened cover and piston.
- Repeat accuracy less than 0.005 mm.
- With locking control (pneumatic), opening control (pneumatic) and support control (pneumatic).
Notes
Spring-loaded central lock to protect the clamping module. The pull studs are fastened and installed using ISO 10642 M8 12.9 countersunk head screws. Locking control: Dynamic pressure when clamping module is locked, flow when clamping module is open. Opening control: Dynamic pressure when clamping module is open, flow when clamping module is locked. Support control via blow-out function: Dynamic pressure when fixture plate is present. The clamping module is opened pneumatically and locked mechanically by spring force. The pressure line can then be disconnected as desired (clamping module is clamped pressure-free). The clamping module has five connections: 1 = pneumatic opening, 3 = pneumatic blow-out, 4 = pneumatic opening control input, 5= bleeding, 8 = pneumatic locking control input * Please follow the installation instructions.
Select RAL-colour code
!! NOTE: On-screen visualisation of the colour differs from real colour shade!!