LET´S WORK TOGETHER.   Welcome to HAHN+KOLB France | For commercial customers only
ATORN rule made of stainless spring steel 1,000 mm, graduation in mm and inches - Flexible steel rule 1/16 inch at the top, 1 mm at the bottom, with fine graduations
ATORN

ATORN rule made of stainless spring steel 1,000 mm, graduation in mm and inches

Brand: ATORN

Length: 1045 mm

Material: Steel, stainless

Calibration Group: AJ

Art.-no. 37171100

Manufacturer article no. 31448074

EAN 4066107114299

All versions


Individual prices for customers after login

You need more information or have not found your desired product?

Application

For determining lengths, as a tool for scribing and marking off

Execution

  • Made of stainless spring steel
  • Small cross-section for flexible design
  • All edges ground and burr-free
  • Anti-glare, matt surface
  • Graduations insensitive to many chemicals, greases and oils
  • Two graduations over the entire length: Scale graduation of 1/16 inch at the top and 1 mm at the bottom
  • With partial fine graduations of 1/32 inch, 1/64 inch and 0.5 mm in the initial range of the graduation

Advantage

  • Conversion of measurements from the metric to the imperial system and vice versa
  • Fine graduation in the initial range for more precise readout and marking
Product information

HAHN+KOLB Catalogue

Certificates/ Documents

 | 

 | 

Brand

ATORN

EAN

4066107114299

Manufacturer Part Number

31448074

Min./max. length measuring range

0-1000 mm

Length

1045 mm

Cross-section length x cross-section width

18 x 0.5 mm

Scale marking on top edge (length)

1/16 in

Scale marking on bottom edge (length)

1 mm

Accuracy class

II

Material

Steel, stainless

Design

Metric, Imperial

Calibration Group

AJ

Harmonized System Code

90178010

Product Group

3AA

Gross Weight

0.079 kg

Additional accessory:
 
Product
Description
Quantity
Price per
Price
DAkkS calibration graduated scales and steel rulers 0–1000 mm
DAkkS calibration graduated scales and steel rulers 0–1000 mm MELUTEC
x 1 Piece
Factory calibration for graduated scales and steel rulers up to 1,000 mm
Factory calibration for graduated scales and steel rulers up to 1,000 mm MELUTEC
x 1 Piece
DAkkS calibration without sticker graduated scales and steel rulers 0–1000 mm
DAkkS calibration without sticker graduated scales and steel rulers 0–1000 mm MELUTEC
x 1 Piece
labelling/lettering/engraving up to 16 chars to be specified in shopping basket
labelling/lettering/engraving up to 16 chars to be specified in shopping basket

Labelling/lettering/engraving up to 16 characters (more than 16 characters available upon request)

x 1 Piece
The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)
In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.
Alternative products:
ORION spring steel scale 1000 mm with 1/2 mm graduations, INOX
1 x
ORION spring steel scale 1000 mm with 1/2 mm graduations, INOX

Flexible steel scale, 0.5 mm at top/1 mm at bottom

ORION
Quantity: 1 x
The packaging unit defines the number of articles in one package:

For example:
1x gloves: 1 pair (2 pieces)
1x bit set: 1 set (10 pieces)
1x screw: package (50 pieces)
In many areas our 8 - digit article number is structured the following way:

First 5 digits = material no . / Product no . + last 3 digits = dimensions / diameter / article no.

For example, solid carbide end mills 3x5x50mm first 5 digits 16851 + last 3 points 050

article no.: 16851050
Price per packaging unit (PU):
The displayed price is always in line with the displayed packaging, if the PU is 250 the price for 250 units, if the PU is 300 the price for 300 units.

Price with price key representation (PSL):
The price always applies to a quantity ruled through the price key:
Price for 1 unit
Price for 100 units
Price for 1000 units
The quantity shows the number of pieces or units of measure contained in the order or delivery for the respective article.
In contrast to sales packaging and secondary packaging, the disposal costs for chemical-technical products are shown separately. The breakdown of the individual costs can be found on the relevant products and also in the shopping cart.

Art.-no.
Cust. Mat. No.

Hazardous Material

Product information

HAHN+KOLB Catalogue

CAD data (available after login)

Certificates/ Documents

 | 

 | 

Technical information
Show all product details