ATORN HPC POWER SC end mill, STAINLESS STEEL, 8.0x19x27x63mm HB, VA long, IC
Brand: ATORN
Surface: ULTRA M
Length: 63 mm
Art.-no. 16855408
Manufacturer article no. 10617310
EAN 4050293410877
Individual prices for customers after login
Application
HPC end mill for machining rust- and acid-proof steels and titanium and nickel-based alloys, optimal application in trochoidal milling and in edge, corner and groove machining.
Execution
- Solid carbide ultra-fine grain
- ULTRA M high-performance coating
- Centre cutting
- Uneven twist angle: 41°/44°
- Unequal cutting edge pitch
- Optimised cutting edge design
- With clearance
- Cutting edge with edge preparation
- With internal cooling
Advantage
- Increased material removal rate
- High process reliability owing to robust cutting edges
- Higher feed rates and cutting depths possible
- Reduces vibrations
- Ideal for static and dynamic trochoidal milling
 | |
Brand | ATORN |
EAN | 4050293410877 |
Manufacturer Part Number | 10617310 |
Cutting material | SC |
Surface | ULTRA M |
Type | VA |
Number of cutting edges (Z) | 4 PCS |
Twist angle | 41°, 44° |
Tool holding device | HB parallel shank |
Construction length | Normal |
Cutting edge diameter | 8 mm |
Cutting edge length | 19 mm |
Clearance length | 27 mm |
Length | 63 mm |
Clearance diameter | 7.7 mm |
Shank diameter | 8 mm |
fz stainless steel | 0.06 mm |
Harmonized System Code | 82077031 |
Gross Weight | 0.042 kg |
Last viewed
ORION high-perf. drill, SC TiAlN, HPC 3xD 4.6 mm x 6 mm x 66 mm HB external
LISTA End side wall L1006 perforated (WxDxH) 21x350x2500mm R7035
KARNASCH sharp-edged jaw - wide fixed plate no. 5 for copper or aluminium
ORION drill and plunge mill, diameter 11.7 mm, HB shaft
ATORN collet ER25 UP dia. 7.0 mm sealed concentricity 2 µm
ATORN solid carbide drill UNI TiAlNplus 8xD with IC 9.8 mm
ATORN solid carbide drill UNI TiAlNplus 8xD with IC 5.1 mm
ASW square adapter, 1 inch to 3/4 inch, length 70 mm
ATORN SC drill bit UNI TiAlNplus 5xD w/ IC 19.9 mm straight shank HB
ATORN tapered interch. head holder 16 x 91 mm steel a=5° head size 20 HA shank